06-30-2007 12:31 PM - edited 03-14-2019 10:20 PM
Can i have E.164 registrations and zone prefix at the same time for the same zone?
06-30-2007 01:50 PM
Yes, to configure zone prefixes, shutdown the gatekeeper and then configure zone prefixes and then do a no shut.
HTH
Sankar.
PS: please remember to rate posts!
07-03-2007 06:19 AM
Hi Sankar,
Thanks for your response.
In my scenario i have 5 locations.
1 CCM and 1 CME, CCM controls 4 locations.
I have a GK but my question now is that what will happen when 1 zone goes to SRST, and CME calls that zone.
Current GK config zone prefixes.
1...
2...
3...
4...
5...
The first 1-4 zone prefixes are controlled by CCM ICT, can i have my SRST GWs registered to the GK and during SRST events add a zone prefix to a different zone (SRST Zones )? I need that when a CME calls, if WAN is still available from CME to GK and SRST GW,but CCMs down... the call gets routed via GK.
For example
gatekeeper
zone local HQ almada3.com 172.16.1.1
zone local BR1 almada3.com
zone local BR2 almada3.com
zone local BR3 almada3.com
zone local CME almada3.com
zone prefix HQ 1...
zone prefix HQ 2...
zone prefix HQ 3...
zone prefix HQ 4...
?
im getting an error when i configure the same prefix for a different zone.
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: