Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

Gateway type

I have 2 GWs registered to GK.

When I do show gatekeeper endpoints, it lists both GWs, but the Type column is different.

One GW is shown as H323-GW, the other as VOIP GW.

10.1.1.2 1720 10.1.1.2 53681 gw1 H323-GW

H323-ID: gw1@cisco.com

10.1.1.3 1720 10.1.1.3 58117 gw2 VOIP-GW

H323-ID: gw2@cisco.com

Both GWs are configured identically( voip interface, voice service voip, gateway, similar dial peers, etc.)

GW2 has some issues where it is not working properly in some situations.

I was thinking that GW type might have anything to do with it.

Here is the question. What makes a GW to register to GK as H323-GW or VOIP-GW?

thanks.

1 REPLY
Bronze

Re: Gateway type

I figured it out.

allow-connections h323 to h323 will register it as H323-GW type.

132
Views
0
Helpful
1
Replies