Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Generating a test call on an ISR

I recall a command (not listed) that allows you to tell an ISR to make an actual call, as if a voice call was being sent to the router.

Does anyone know this command?

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: Generating a test call on an ISR

The command is "csim start".

Hope this helps. If so, please rate the post.

Brandon

Re: Generating a test call on an ISR

As everyone has said "csim start". It is a very useful tool, but you'll need to make sure you have dialpeers created to match or it want work.

4 REPLIES

Re: Generating a test call on an ISR

The command is "csim start".

Hope this helps. If so, please rate the post.

Brandon

Re: Generating a test call on an ISR

Note that csim start is a hidden command.

Re: Generating a test call on an ISR

As everyone has said "csim start". It is a very useful tool, but you'll need to make sure you have dialpeers created to match or it want work.

New Member

Re: Generating a test call on an ISR

thanks everyone!

215
Views
10
Helpful
4
Replies
CreatePlease to create content