I am having the following problem with some incoming calls on a Q931 circuit in Germany.
If from the UK I dial my customers number which ends 664080xx the called party number presented to the sites 2811 is the full 8 digits meaning the call can be routed correctly to the callmanager. However, if the same number is dialed from certain exchanges within Germany only the first six digits, 664080 part of the number, is being sent as the called party number as per the below debug. The last two numbers appear to be stripped.
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x2180, '617xxxxxxx'
Called Party Number i = 0xC1, '664081'
I am guessing that as the call is being presented to the 2811 as a "Plan:ISDN, Type:Subscriber(local)" number the last two digits are going to se sent as MSN (multiple subscriber number) numbers. Is this suspiction correct and if it is how do I get the router to collect the last two digits so the call can be successfully routed onto the callmanager?
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...