Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Get fast busy signal

Hello. I have next scheme:

Cisco 9971(1000) ---- Cisco 3945 -------- Cisco 2910 --- Cisco 7742G(1001)

Between two Cisco routers I configured dial-peers and it seems to be working (debug voice dialpeer shows success on both routers). But when I call from 1000 to 1001 or vice versa, I get fast busy tone. Could any one provide any suggestions what could br wrong?

Config is simple:

dial-peer voice 1001 voip

destination-pattern 1001

session target ipv4:10.2.4.254

codec g711alaw

And

dial-peer voice 113 voip

destination-pattern 1000

session target ipv4:10.2.4.120

codec g711alaw

Everyone's tags (3)
8 REPLIES

Get fast busy signal

Output from debud voice dialpeer:

cisco2901#

122968: Oct  4 16:49:47.183 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Calling Number=, Called Number=1, Peer Info Type=DIALPEER_INFO_SPEECH

122969: Oct  4 16:49:47.183 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Match Rule=DP_MATCH_DEST; Called Number=1

122970: Oct  4 16:49:47.183 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Result=Partial Matches(1) after DP_MATCH_DEST

122971: Oct  4 16:49:47.183 UTC+2: //-1/0893AE5B997F/DPM/dpMatchSafModulePlugin:

   dialstring=1, saf_enabled=1, saf_dndb_lookup=0, dp_result=1

122972: Oct  4 16:49:47.183 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersMoreArg:

   Result=MORE_DIGITS_NEEDED(1)

122973: Oct  4 16:49:47.859 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Calling Number=, Called Number=10, Peer Info Type=DIALPEER_INFO_SPEECH

122974: Oct  4 16:49:47.859 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Match Rule=DP_MATCH_DEST; Called Number=10

122975: Oct  4 16:49:47.859 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Result=Partial Matches(1) after DP_MATCH_DEST

122976: Oct  4 16:49:47.859 UTC+2: //-1/0893AE5B997F/DPM/dpMatchSafModulePlugin:

   dialstring=10, saf_enabled=1, saf_dndb_lookup=0, dp_result=1

122977: Oct  4 16:49:47.859 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersMoreArg:

   Result=MORE_DIGITS_NEEDED(1)

122978: Oct  4 16:49:48.195 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Calling Number=, Called Number=100, Peer Info Type=DIALPEER_INFO_SPEECH

122979: Oct  4 16:49:48.195 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Match Rule=DP_MATCH_DEST; Called Number=100

122980: Oct  4 16:49:48.199 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Result=Partial Matches(1) after DP_MATCH_DEST

122981: Oct  4 16:49:48.199 UTC+2: //-1/0893AE5B997F/DPM/dpMatchSafModulePlugin:

   dialstring=100, saf_enabled=1, saf_dndb_lookup=0, dp_result=1

122982: Oct  4 16:49:48.199 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersMoreArg:

   Result=MORE_DIGITS_NEEDED(1)

122983: Oct  4 16:49:48.523 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Calling Number=, Called Number=1000, Peer Info Type=DIALPEER_INFO_SPEECH

122984: Oct  4 16:49:48.523 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Match Rule=DP_MATCH_DEST; Called Number=1000

122985: Oct  4 16:49:48.523 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Result=Success(0) after DP_MATCH_DEST

122986: Oct  4 16:49:48.523 UTC+2: //-1/0893AE5B997F/DPM/dpMatchSafModulePlugin:

   dialstring=1000, saf_enabled=1, saf_dndb_lookup=0, dp_result=0

122987: Oct  4 16:49:48.523 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersMoreArg:

   Result=SUCCESS(0)

   List of Matched Outgoing Dial-peer(s):

     1: Dial-peer Tag=113

122988: Oct  4 16:49:48.523 UTC+2: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

   Calling Number=1001, Called Number=, Voice-Interface=0x0,

   Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,

   Peer Info Type=DIALPEER_INFO_SPEECH

122989: Oct  4 16:49:48.523 UTC+2: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

   Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=100

122990: Oct  4 16:49:48.523 UTC+2: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

   dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0

122991: Oct  4 16:49:48.527 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Calling Number=, Called Number=1000, Peer Info Type=DIALPEER_INFO_SPEECH

122992: Oct  4 16:49:48.527 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Match Rule=DP_MATCH_DEST; Called Number=1000

122993: Oct  4 16:49:48.527 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Result=Success(0) after DP_MATCH_DEST

122994: Oct  4 16:49:48.527 UTC+2: //-1/0893AE5B997F/DPM/dpMatchSafModulePlugin:

   dialstring=1000, saf_enabled=0, saf_dndb_lookup=1, dp_result=0

122995: Oct  4 16:49:48.527 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersMoreArg:

   Result=SUCCESS(0)

   List of Matched Outgoing Dial-peer(s):

     1: Dial-peer Tag=113

     2: Dial-peer Tag=100

122996: Oct  4 16:49:48.527 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Calling Number=, Called Number=1000, Peer Info Type=DIALPEER_INFO_SPEECH

122997: Oct  4 16:49:48.527 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Match Rule=DP_MATCH_DEST; Called Number=1000

122998: Oct  4 16:49:48.527 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersCore:

   Result=Success(0) after DP_MATCH_DEST

122999: Oct  4 16:49:48.527 UTC+2: //-1/0893AE5B997F/DPM/dpMatchSafModulePlugin:

   dialstring=1000, saf_enabled=0, saf_dndb_lookup=1, dp_result=0

123000: Oct  4 16:49:48.527 UTC+2: //-1/0893AE5B997F/DPM/dpMatchPeersMoreArg:

   Result=SUCCESS(0)

   List of Matched Outgoing Dial-peer(s):

     1: Dial-peer Tag=113

     2: Dial-peer Tag=100

123001: Oct  4 16:49:48.527 UTC+2: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

   Calling Number=1000, Called Number=1000, Peer Info Type=DIALPEER_INFO_SPEECH

123002: Oct  4 16:49:48.527 UTC+2: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

   Match Rule=DP_MATCH_DEST; Called Number=1000

123003: Oct  4 16:49:48.527 UTC+2: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

   Result=Success(0) after DP_MATCH_DEST

123004: Oct  4 16:49:48.527 UTC+2: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

   dialstring=1000, saf_enabled=0, saf_dndb_lookup=1, dp_result=0

123005: Oct  4 16:49:48.527 UTC+2: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:

   Result=SUCCESS(0)

   List of Matched Outgoing Dial-peer(s):

     1: Dial-peer Tag=113

     2: Dial-peer Tag=100

Get fast busy signal

Hello

Please can you use under the dial-peer codec g729r8, not g711alaw?.

Thank you

please rate all useful information

Get fast busy signal

I tried it already - no use(((

New Member

Get fast busy signal

Hi Volodymyr,

Do you have in this scenario, SIP and H323 for calls.

Ckeck in voice service voip (sip to h323 calls, and redirect ip2ip and trust list) features enable.

Ex:

voice service voip

ip address trusted list

  ipv4 10.1.32.0 255.255.255.0

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

redirect ip2ip

Regards.

J Rosa.

Get fast busy signal

Yeap, I have such config already, but nevertheless it does not work(((

I tried to set codec everywhere to the same value but the result is the same(

New Member

Get fast busy signal

Hi,

The configs already in your router, ok! In destination router the config is same or no?

If possible, describe the your scenario CME X CME and attached configs the router A and B.

Regards.

J Rosa.

Bronze

Get fast busy signal

hi

   Did you check whether u can ping between routers.

Thanks

New Member

Get fast busy signal

Can you share the show run from both routers?

Regards,

Piyush

398
Views
0
Helpful
8
Replies