Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Getting Faxes to Unity

Am I correct that in addition to Unity fax integration steps, the router has to be configured for T.37? So faxes are converted to TIF's on router, and then TIF's sent to Unity?

thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Getting Faxes to Unity

That is correct. Take a look at the configuration example below.

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_configuration_example09186a0080387d62.shtml

Also, be aware that Unity IP Fax is intended for a small number of users and is only supported in a voicemail only environment. See the following link.

http://www.ciscounitytools.com/App_IPFaxConfigurationWizard.htm

Hope this helps. If so, please rate the post.

Brandon

2 REPLIES

Re: Getting Faxes to Unity

That is correct. Take a look at the configuration example below.

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_configuration_example09186a0080387d62.shtml

Also, be aware that Unity IP Fax is intended for a small number of users and is only supported in a voicemail only environment. See the following link.

http://www.ciscounitytools.com/App_IPFaxConfigurationWizard.htm

Hope this helps. If so, please rate the post.

Brandon

New Member

Re: Getting Faxes to Unity

thank you very much

109
Views
0
Helpful
2
Replies
CreatePlease to create content