Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Globally add 2nd line appearance?

I have a 100 7961s that are only using the 1st line with their extension as the line label. The client is requesting to enable the 2nd line and put "Line 2" as the label instead of the extension. I don't know of a way to do this other than going into the extensions one by one and adding the individual DN's to the 2nd line.

Is there a way to do this system wide?

Thank you in advance.

2 REPLIES
Silver

Re: Globally add 2nd line appearance?

Hi,

You can add this 2nd line with BAT (Bulk Admin Tool):

For CallManager 4.x - 5.1

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/admin/bulk_adm/index.htm

Adding lines to existing phones:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/5_1_4/bat_phon.html#wp1273434

What version of CCM do you have?

Please rate useful posts...

New Member

Re: Globally add 2nd line appearance?

CCM 4.2(3)

This will work. Thank you!

118
Views
0
Helpful
2
Replies
CreatePlease to create content