Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

GUI Issue

Hello Netpro

I got “CME 7.1(0) Updated GUI files for IOS 12.4(24)T releases” but cannot access GUI interface, no error

page is loading??? for last 10mins, try again same issue. I test on IE 6 / 7 / 8

ip http server
   ip http authentication local
   ip http path flash:

   telephony-service
     web admin system name f99 password cisco

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: GUI Issue CME

The ones in GUI directory.

17 REPLIES
Hall of Fame Super Gold

Re: GUI Issue

Which exact IOS do you have ?

New Member

Re: GUI Issue

IP VOICE IOS 12.4(24)T

I get a gray screen with VIEW WINDOW

any clue

New Member

Re: GUI Issue CME

Error

Webpage error details, on status bar i get Cisco unified Communication Manager Express but page remains blank

On clicking the ! mark I get this error msg.


Message: Expected ';'
Line: 2567
Char: 14
Code: 0
URI: http://192.168.1.2/ITSMain


Message: 'maxC' is undefined
Line: 2685
Char: 11
Code: 0
URI: http://192.168.1.2/ITSMain

New Member

Re: GUI Issue CME

Hello

what is ITSMAIN, M I missing some config.

Hall of Fame Super Gold

Re: GUI Issue CME

You are not missing anything.

Try cleaning and reinstalling, otherwise switch to YB5 and related fies, I have it working in many sites.

New Member

Re: GUI Issue CME

p.bevilacqua Thank You

Clean and reinstall the configuration or IOS Software

what is YB5? I didnt got this??

Hall of Fame Super Gold

Re: GUI Issue CME

12.4.22 yb5

New Member

Re: GUI Issue CME

Thanks bevilacqua

I am downloading c2801-ipvoicek9-mz.124-22.YB5.bin  but which GUI version for CME do you advice and working with you.

New Member

Re: GUI Issue CME

Hi

Is this GUI Version OK

cme-gui-7.0.0.1.tar
Release Date:  24/Jul/2008
CME 7.0 GUI file.
Size: 782.00 KB  (800768 bytes)

Which version is working with you???

Hall of Fame Super Gold

Re: GUI Issue CME

Not that.

For YB5, the one that comes in the big tarfile for YB.

New Member

Re: GUI Issue CME

Hi

big TarFile is 70MB and another is 86MB

If you say anyone of these then i would have problem with flash size ( its kinda 64MB only )

If its not this then can you put the exact name or screenshot.

thanks

Hall of Fame Super Gold

Re: GUI Issue CME

Extract the GUI files first.

New Member

Re: GUI Issue CME

Cannot extract the file on Router, but will extract on a Linux Machine.

What next.

Hall of Fame Super Gold

Re: GUI Issue CME

Winrar and many other SW handle .tar on PCs.

Then copy to router and test. Must be used with IOS YB5.

New Member

Re: GUI Issue CME

Hi Paolo

What version of IOS 15.x do you know that works with CME GUI 8.0, 8.1 or 8.5?

I'm getting the following error.

Permission denied

ITSMain                                   Line: 1

Code 0                                   Char: 1

URI:http://x.x.0.51/ITSMain

I've already tried a lot of them based on IOS and CME Compatibilty Matrix with no success. Like,

c3900-universalk9-mz.SPA.151-1.Tx.bin with CME GUI 8.0

c3900-universalk9-mz.SPA.151-2.Tx.bin with CME GUI 8.1

c3900-universalk9-mz.SPA.151-3.Tx.bin with CME GUI 8.5

Any ideas?

Thanks.

New Member

Re: GUI Issue CME

Hi

There are so many files after extraction, I cannot copy all due to limited flash.

Which files to copy to the flash.

Hall of Fame Super Gold

Re: GUI Issue CME

The ones in GUI directory.

953
Views
0
Helpful
17
Replies
CreatePlease to create content