Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

GUI of unity express module is not working

Hi Geeks

Is anyone know which files we need to run the GUI of unity express GUI cause recently by mistake i router (which contain unity module also )  flash is erased now i need to access my unity module through GUI can anyone elaborate me which files we must have to run unity express module GUI ..

i will be very thankfull....

Regards

Salman                 

  • IP Telephony
2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Gold

GUI of unity express module is not working

If CUE works, CUE GUI will work.

Otherwise you have to re-install software on it.

GUI of unity express module is not working

To access CUE GUI you simply go to your web browser to navigate to the IP Address configured for the CUE module... In versions 7.x sometimes you have to write /web at the end http://ipaddress/web

To check the CUE version, you can go into the CUE CLI and issue "show software version"

--
Jorge Armijo

Please remember to rate helpful responses and identify helpful or correct answers.

-- Jorge Armijo Please remember to rate helpful responses and identify helpful or correct answers.
3 REPLIES
Hall of Fame Super Gold

GUI of unity express module is not working

If CUE works, CUE GUI will work.

Otherwise you have to re-install software on it.

New Member

GUI of unity express module is not working

Hi Paolo

Thanks for reply ....... it means CUE GUI is not depended on any file of flash .??? i can access my unity module through my router how i can check the image in CUE ??? let me know what steps i can take to verify that cisco unity is working fine mean while i will try to recheck the configuration of my CUE may be its have some configuration issues......

Regards

Salman

GUI of unity express module is not working

To access CUE GUI you simply go to your web browser to navigate to the IP Address configured for the CUE module... In versions 7.x sometimes you have to write /web at the end http://ipaddress/web

To check the CUE version, you can go into the CUE CLI and issue "show software version"

--
Jorge Armijo

Please remember to rate helpful responses and identify helpful or correct answers.

-- Jorge Armijo Please remember to rate helpful responses and identify helpful or correct answers.
191
Views
0
Helpful
3
Replies