cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
273
Views
4
Helpful
4
Replies

GW-GK Registeration issue

madan.kumar
Level 1
Level 1

Hi

I'm trying a scenario of 2 GW's and a GK

Am able to register 1 GW without any issues

the other one is not registering tried no gateway/gateway and debug h225 asn1 & debug ras doesnt gives any output, Able to ping from source IP's

Attached is the config i'm trying

Thanks in Advance

4 Replies 4

Chris Deren
Hall of Fame
Hall of Fame

What does "debug h225 asn1" reveal? Can you post it?

Chris

Marwan ALshawi
VIP Alumni
VIP Alumni

try to make a dial peer on the MIAMI gateway

and the destination is RSA

to let the gateway register with the GK

i can see u have number registered from biose GW so u need a dial-peer with

session target ras command to let it register with GK

ur config looks good

i think its similer to the config on cisco voice gateways and gatekeepers book :)

also add this to ur GK

gw-type-prefix 1#* default-technology

and do under katekeeper

shut

then no shut

and before u configure the RAS dial-peer on the gate wae

do

no gateway

then enter the

gateway command

try it and let me know

also

good luck

please, if helpful rate

Hi

There were some config mistakes(the other netpro helped me to fix)then also it was not registering

"need a dial-peer with

session target ras command to let it register with GK"

This was spot on resolved my issue so 4 poits to u

Thank u

iam happy it worked

and thanks for rating too :)

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: