Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

GW-GK Registeration issue

Hi

I'm trying a scenario of 2 GW's and a GK

Am able to register 1 GW without any issues

the other one is not registering tried no gateway/gateway and debug h225 asn1 & debug ras doesnt gives any output, Able to ping from source IP's

Attached is the config i'm trying

Thanks in Advance

4 REPLIES
Hall of Fame Super Silver

Re: GW-GK Registeration issue

What does "debug h225 asn1" reveal? Can you post it?

Chris

Re: GW-GK Registeration issue

try to make a dial peer on the MIAMI gateway

and the destination is RSA

to let the gateway register with the GK

i can see u have number registered from biose GW so u need a dial-peer with

session target ras command to let it register with GK

ur config looks good

i think its similer to the config on cisco voice gateways and gatekeepers book :)

also add this to ur GK

gw-type-prefix 1#* default-technology

and do under katekeeper

shut

then no shut

and before u configure the RAS dial-peer on the gate wae

do

no gateway

then enter the

gateway command

try it and let me know

also

good luck

please, if helpful rate

Community Member

Re: GW-GK Registeration issue

Hi

There were some config mistakes(the other netpro helped me to fix)then also it was not registering

"need a dial-peer with

session target ras command to let it register with GK"

This was spot on resolved my issue so 4 poits to u

Thank u

Re: GW-GK Registeration issue

iam happy it worked

and thanks for rating too :)

116
Views
4
Helpful
4
Replies
CreatePlease to create content