cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1808
Views
0
Helpful
5
Replies

H.323 gateway, PRI and Caller-id

I've got two seperate locations with H.323 gateways that trunk back to Callmanager 8.5 in a third seperate location, connected via MPLS.  Recently the client had the carrier turn on caller-id on the two PRIs.  At one location, caller-id displays fine, number and name.  In the other location though, only the number shows up.  I verified that caller-id is being sent on the PRI and it's the same carrier for both locations.  Not sure what else i'm missing...

5 Replies 5

paolo bevilacqua
Hall of Fame
Hall of Fame

Take "debug isdn q931" with "term mon" to verify telco (not) sending Calling Name.

I did...name is coming through...that's where I'm stumped...with SIP, no issues at other clients...

Appreciate any feedback.

Scott A. Jones, CCVP

Iplogic, inc.

Sent from my iPhone

Check that you have configured "isdn supp-service name calling".

Ahh...I'll check that. I'll let you know.

Thanks!

Scott A. Jones, CCVP

Iplogic, inc.

Sent from my iPhone

Scott,

Also, ensure you have the following command:

voice service voip

h323

  h225 display-ie ccm-compatible

Chris

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: