Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

h.323 Gateway with Calling-name and Calling-number

I migrated a voice gateway from MGCP to H.323 for purposes of faxing. I am using 12.4-11(XW6), with the support for calling name on the H.323 gateway. So, when a call comes in, the phone is showing only the calling name, and not the number as the MGCP gateway was able to do.

Is there a fix that I can show both name and number?

Thanks,

Jeff

1 REPLY
Bronze

Re: h.323 Gateway with Calling-name and Calling-number

Try enabling caller-ID on the voice port.

Its is disabled by default.

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a00800a9a49.shtml

130
Views
0
Helpful
1
Replies