12-29-2008 10:31 AM - edited 03-15-2019 03:15 PM
When using MGCP with CUCM if there is a failed trunk, it realizes it's failed and jumps to the next trunk.
When using H.323 (my personal preference) if the trunk it choses does not work, it simply fails dropping fast busy to the end user - making the rest of the lines useless. Is there a command in the IOS to tell it to try the next trunk in a trunk list in the event of failure?
Solved! Go to Solution.
12-29-2008 11:42 AM
change this on CUCM
Clusterwide Parameters (Route Plan)
Stop Routing on Unallocated Number Flag = False
Stop Routing on User Busy Flag = Flag
or on GW:
no dial-peer outbound status-check pots
HTH
java
if this helps, please rate
12-29-2008 11:42 AM
change this on CUCM
Clusterwide Parameters (Route Plan)
Stop Routing on Unallocated Number Flag = False
Stop Routing on User Busy Flag = Flag
or on GW:
no dial-peer outbound status-check pots
HTH
java
if this helps, please rate
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide