Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

h323 and FXS: Transfer a Call

Hi,

I need to know if anyone has been able to to the following:

- 3 h323 gateways (2800) configured with 2 FXS ports installed

-analog phones connected to the FXS port

-analog phone router1 establishes a call with analog phone router2--> analog phone router 1 presses flash, gets a dial tone from the gateway, calls analog phone router3 and transfers the call.

What is needed to transfer an H323 call from one FXS port to another FXS port on a different gateway?

Many thanks,

Dragi

5 REPLIES
Hall of Fame Super Gold

Re: h323 and FXS: Transfer a Call

Just a matter of right IOS and configuration. For example, you can configure the FXS ports as SCCP for a central CCME and have all the features:

http://cisco.com/en/US/products/ps6441/products_feature_guide09186a0080483a76.html

Hope this help, if so rate this posts.

New Member

Re: h323 and FXS: Transfer a Call

there is no CCME involved in this. Just h323 with gateways.

Dragi

Hall of Fame Super Gold

Re: h323 and FXS: Transfer a Call

Mine was a configuration suggestion, CCME is embedded in all voice images, and is enable with "telephony-services".

There are ways of having transfer on FXS ports, however that may imply TCL scripting etc:

http://cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00801814cf.html

The CCME approach is much simpler and better documented.

New Member

Re: h323 and FXS: Transfer a Call

in the end, this is the configuration I used:

tftp-server flash:prompts/en/en_music_xferee_ulaw.au

tftp-server flash:prompts/en/en_author_fail_ulaw.au

tftp-server flash:prompts/en/en_busy_tone_ulaw.au

tftp-server flash:prompts/en/en_dest_blocked_ulaw.au

tftp-server flash:prompts/en/en_dest_busy_ulaw.au

tftp-server flash:prompts/en/en_disconnected_ulaw.au

tftp-server flash:prompts/en/en_enter_dest_ulaw.au

tftp-server flash:prompts/en/en_fast_busy_tone_ulaw.au

tftp-server flash:prompts/en/en_music_xferto_ulaw.au

tftp-server flash:prompts/en/en_no_dest_entered_ulaw.au

tftp-server flash:prompts/en/en_no_service_available_ulaw.au

tftp-server flash:prompts/en/en_operator_is_busy_ulaw.au

tftp-server flash:prompts/en/en_reenter_dest_ulaw.au

tftp-server flash:prompts/en/en_ringback_tone_ulaw.au

!

control-plane

!

!

call application voice transfer_app flash:app-h450-transfer.2.0.0.9.tcl

call application voice transfer_app delay-time 1

call application voice transfer_app language 1 en

call application voice transfer_app set-location en 0 flash:/prompts/en/

!

!

voice-port 1/0/0

!

voice-port 1/0/1

!

voice-port 1/1/0

!

voice-port 1/1/1

!

!

!

!

!

dial-peer voice 1111 pots

application transfer_app

destination-pattern 1111

port 1/0/0

!

dial-peer voice 2222 pots

application transfer_app

destination-pattern 2222

port 1/0/1

!

dial-peer voice 3333 pots

application transfer_app

destination-pattern 3333

port 1/1/0

It works really well. The app-h450-transfer zip file with all the prompts is on CCO, where CME files are.

Dragi

Hall of Fame Super Gold

Re: h323 and FXS: Transfer a Call

Great info, thanks!

I have rated you post 5!

324
Views
5
Helpful
5
Replies
CreatePlease to create content