h323 ata, ccm 4.1(3), mgcp gw and srst

[fjrubiobarcena]

Hello, We have a centralised ip telephony environment in one of the remote offices I am trying to configure a h323 ata to communicate with the callmanager I can made it work with the callmanager (I have configure the callmanager ip in the ata as a h323 gateway) but I don?t know how to make it work when we lose the communication with the callmanager and the local gateway is in srst mode.

[gogasca]

I suggest you to change ATA to SCCP load.

With that it will support SRST.

http://www.cisco.com/en/US/products/sw/voicesw/ps2169/prod_module_installation_guide09186a008057793a.html

You need at least:

ATA030100SCCP040211A.zup

[fjrubiobarcena]

Thanks for your reply, but, at the beginning I tried to do it with srst but when the gateway entered in srst mode the ata could not send or receive any faxes.