Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

h323 ata, ccm 4.1(3), mgcp gw and srst

Hello, We have a centralised ip telephony environment in one of the remote offices I am trying to configure a h323 ata to communicate with the callmanager I can made it work with the callmanager (I have configure the callmanager ip in the ata as a h323 gateway) but I don?t know how to make it work when we lose the communication with the callmanager and the local gateway is in srst mode.

2 REPLIES
Green

Re: h323 ata, ccm 4.1(3), mgcp gw and srst

I suggest you to change ATA to SCCP load.

With that it will support SRST.

http://www.cisco.com/en/US/products/sw/voicesw/ps2169/prod_module_installation_guide09186a008057793a.html

You need at least:

ATA030100SCCP040211A.zup

New Member

Re: h323 ata, ccm 4.1(3), mgcp gw and srst

Thanks for your reply, but, at the beginning I tried to do it with srst but when the gateway entered in srst mode the ata could not send or receive any faxes.

108
Views
0
Helpful
2
Replies