Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

H323 Block call on ANI

Currently I have the a inbound translation pattern which translates the called number from 10 to 6.  Translation profile which is applied as imcoming to the pots dial peer is .

I need to block a few numbers based on originating ANI.  I have made new translation rules to reject the numbers, and they do work.

Can I have a translate called, and a translate calling  on the same profile / dial peer.

Voice translation-rule 12

rule 1 /41625\(.....\)/ /1\1/

Voice translation-rule 13

rule 1 reject /^(10 digit number)/

Voice translation-profile XXXX

translate calling 13

translate called 12

Is this possible?  Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: H323 Block call on ANI

You can have translate called and calling directives on the same translation

profile. Though, I think that when you are doing a call rejection this

configuration approach doesn't apply. I block calls using the "call-block"

command under the pots dial-peer. This is evaluated independently of a

translation. Or at least that is my understanding.

HTH.

Regards,

Bill

On 9/8/10 5:44 PM, "balitewiczp"

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

2 REPLIES

Re: H323 Block call on ANI

You can have translate called and calling directives on the same translation

profile. Though, I think that when you are doing a call rejection this

configuration approach doesn't apply. I block calls using the "call-block"

command under the pots dial-peer. This is evaluated independently of a

translation. Or at least that is my understanding.

HTH.

Regards,

Bill

On 9/8/10 5:44 PM, "balitewiczp"

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

New Member

Re: H323 Block call on ANI

Thanks for the info and quick response.  Using called blocking command worked very nicely.

382
Views
10
Helpful
2
Replies
CreatePlease login to create content