Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

H323 call preserve on WAN failure

Hi

I added call preserve under voice service voip, and set the clusterwide parameter to true, made a call and failed the WAN, the call held up no problem, I could see the preserved call under 'show h323 calls preserved', all good.

Problem is when the call is ended and I do 'show ISDN active', the call is still held up, any ideas?

Thanks

Tim

2 REPLIES
Cisco Employee

Re: H323 call preserve on WAN failure

Tim,

You'll need to configure/enable the media inactivity timer feature so that the call is torn down when both parties hang up. It's covered in the following documentation.

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/cisco_ios_h323_configuration_guide/old_archives_h323/4gwconf.html#wp1149764

-Felipe

Community Member

Re: H323 call preserve on WAN failure

Hi Felipe

Done that, works a treat, thanks V much........

271
Views
0
Helpful
2
Replies
CreatePlease to create content