I'm requesting assistance on the following issue. I have an h323 gateway that I'm using in a trunk group with 4 lines.
The issue I'm having is if I unplug the cable from line 1 and place an outbound call, it tries to go out of line 1 and I get a busy signal. I even tried to leave the next three lines plugged in and place a second call while the first one is giving the busy signal without the cable plugged in. The call still tries to go out of that line and never rolls to the other lines.
The only time it rolls is if I physically shut down line 1.
How can I set the router up to bypass that port if the line is disconnected?
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...