Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

H323 Inbound Calling Name Display

Recently converted GW from MGCP to H323. Inbound CNAM is no longer displaying. Is there a config option in the dial-peer? Thanks

4 REPLIES
Hall of Fame Super Gold

Re: H323 Inbound Calling Name Display

Try

voice service voip

qsig decode

New Member

Re: H323 Inbound Calling Name Display

Thanks for the response. Dont see that option. IOS 12.3(11)T8

allow-connections

cause-code

default

exit

fax

h323

modem

no

redirect

shutdown

signaling

sip

supplementary-service

Cisco Employee

Re: H323 Inbound Calling Name Display

Hi!

Please refer to:

--> H.323 Name Display

http://www.cisco.com/en/US/docs/ios/12_4/12_4x/release/notes/rn2800xw.html#wp363697

And check that on the H.323 GW configuration page on the CUCM admin the "Display IE Delivery on GW" checkbox.

HTH!

Regards,

Teresa.

If it helps, please rate.

Regards, Tere. If you find this post helpful, please rate! :)
New Member

Re: H323 Inbound Calling Name Display

This helps alot. Looks like I need to upgrade to 12.4. Currently, its on 12.3

Thanks again, for the response

324
Views
4
Helpful
4
Replies
CreatePlease to create content