02-14-2008 12:27 PM - edited 03-15-2019 08:50 AM
Our gateways are currently configured with H323 (no MGCP) and I am working on the dial peer design for the fail over scenario. Do I need a final dial peer with the lowest preference pointed at the ip address of the interface that is bound to H323? My instict says yes, but I am having difficulty finding documentation to support that thought. I added it in the template and I am being asked why I need the final dial peer. In the past I have always put this dial peer in. Any thoughts?
Solved! Go to Solution.
02-14-2008 01:08 PM
No, there is no need for a dial peer pointed to a local IP address. You simply need dial peers pointed to the port(s) used for PSTN connectivity.
Hope this helps. If so, please rate the post.
Brandon
02-14-2008 01:08 PM
No, there is no need for a dial peer pointed to a local IP address. You simply need dial peers pointed to the port(s) used for PSTN connectivity.
Hope this helps. If so, please rate the post.
Brandon
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: