I have a H323-SRST Gw resgistered with the CUCM. I am using a 5 digit number as my extension numbers. Users normally dial the last 4 digits of the extension series to dial the extension. I have created a translation Pattern which prefixes the 5th digit to the 4 digits which user dials.
My question in when the phones fall back to SRST mode..how this is achieved ...becase the phone will register with the 5 digit extension. Can we use any transtion in the call manager fallback ?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...