Re: hardware-conference, more conferences when less participants
Unfortunately this is not supported. With the PVDM2-16 using g729a there is only support for 2 sessions (conferences) Have a look;
Conferencing needs dedicated DSP resources. A DSP will support eight conference calls on a G.711 codec, or two conference calls on a G.729/G.711 configuration. (The PVDM2-16 will support eight conference calls on G.711 or 2 conference calls on G.729/G.711.) There is a maximium of eight participants per conference.
A conference based on these DSPs allows a maximum of 8 participants. When a conference begins, all 8 positions are reserved at that time.If you configure all conferencing for both G.711 and G.729 codecs, then each DSP provides only 2 conferences of 8 participants each.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.