Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Help 2651XM, NM-HDV2-2T1/E1 & VIC-2FXO= Amber lights

Trying to put together a CCNA Voice Lab from spare parts..

So far I Have a 2651XM with NM-HDV2-2T1/E1 & VIC-2FXO= installed in the slot on the NM-HDV2.

VIC-2FXO has amber lights.  Any ideas??

------------------------------------------

Router#sho ver

Cisco IOS Software, C2600 Software (C2600-IPVOICEK9-M), Version 12.4(25d), RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

Compiled Wed 18-Aug-10 04:49 by prod_rel_team

ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

Router uptime is 13 minutes

System returned to ROM by power-on

System image file is "flash:c2600-ipvoicek9-mz.124-25d.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 2651XM (MPC860P) processor (revision 4.1) with 253952K/8192K bytes of memory.

Processor board ID FTX0942A2TS

M860 processor: part number 5, mask 2

2 FastEthernet interfaces

2 Channelized (E1 or T1)/PRI ports

32K bytes of NVRAM.

32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router#sho diag

Slot 0:

        C2651XM 2FE Mainboard Port adapter, 2 ports

        Port adapter is analyzed

        Port adapter insertion time 00:09:07 ago

        EEPROM contents at hardware discovery:

        Hardware Revision        : 4.1

        PCB Serial Number        : FOC09321EJ6

        Product (

        Chassis Serial Number    : FTX0942A2TS

        Part Number              : 73-7756-06

        RMA History              : 00

        RMA Number               : 0-0-0-0

        Board Revision           : B0

        Deviation Number         : 0-0

        EEPROM format version 4

        EEPROM contents (hex):

          0x00: 04 FF 40 03 6F 41 04 01 C1 0B 46 4F 43 30 39 33

          0x10: 32 31 45 4A 36 CB 12 FF FF FF FF FF FF FF FF FF

          0x20: FF FF FF FF FF FF FF FF FF C2 0B 46 54 58 30 39

          0x30: 34 32 41 32 54 53 82 49 1E 4C 06 04 00 81 00 00

          0x40: 00 00 42 42 30 80 00 00 00 00 FF FF FF FF FF FF

          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Slot 1:

        High Density Voice NM-HDV2-2T1/E1 Port adapter

        Port adapter is analyzed

        Port adapter insertion time 00:08:54 ago

        EEPROM contents at hardware discovery:

        Hardware Revision        : 1.1

        Top Assy. Part Number    : 800-22168-03

        Board Revision           : C0

        Deviation Number         : 0

        Fab Version              : 04

        PCB Serial Number        : FOC12121GCF

        RMA Test History         : 00

        RMA Number               : 0-0-0-0

        RMA History              : 00

        Fab Part Number          : 28-6126-04

        Manufacturing Test Data  : 00 00 00 00 00 00 00 00

        Field Diagnostics Data   : 00 00 00 00 00 00 00 00

        Product (FRU) Number     : NM-HDV2-2T1/E1

        Version Identifier       : V03

        EEPROM format version 4

        EEPROM contents (hex):

          0x00: 04 FF 40 03 DB 41 01 01 C0 46 03 20 00 56 98 03

          0x10: 42 43 30 88 00 00 00 00 02 04 C1 8B 46 4F 43 31

          0x20: 32 31 32 31 47 43 46 03 00 81 00 00 00 00 04 00

          0x30: 85 1C 17 EE 04 C4 08 00 00 00 00 00 00 00 00 C5

          0x40: 08 00 00 00 00 00 00 00 00 CB 8E 4E 4D 2D 48 44

          0x50: 56 32 2D 32 54 31 2F 45 31 89 56 30 33 20 D9 02

          0x60: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        FPGA revision:0x16C

        WIC Slot 0:

        FXO Voice daughter card (2 port)

        Hardware revision 1.0           Board revision A0

        Serial number     7048223       Part number    800-02495-01

        FRU Part Number     VIC-2FXO=

        Test history      0x0           RMA number     00-00-00

        Connector type    Wan Module

        EEPROM format version 1

        EEPROM contents (hex):

          0x20: 01 0D 01 00 00 6B 8C 1F 50 09 BF 01 00 00 00 00

          0x30: 50 00 00 00 98 01 09 01 FF FF FF FF FF FF FF FF

        WIC Slot 1:

        HDV2 on board t1/e1 controller (2 port)

        PVDM Slot 0:

        32-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card

        Hardware Revision        : 4.0

        Part Number              : 73-8539-05

        Board Revision           : B0

        Deviation Number         : 0

        Fab Version              : 04

        PCB Serial Number        : FOC12121JHH

        RMA Test History         : 00

        RMA Number               : 0-0-0-0

        RMA History              : 00

        Processor type           : 00

        Product (FRU) Number     : PVDM2-32

        Version Identifier       : V01

        EEPROM format version 4

        EEPROM contents (hex):

          0x00: 04 FF 40 03 EE 41 04 00 82 49 21 5B 05 42 42 30

          0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43 31 32 31 32

          0x20: 31 4A 48 48 03 00 81 00 00 00 00 04 00 09 00 CB

          0x30: 88 50 56 44 4D 32 2D 33 32 89 56 30 31 20 D9 02

          0x40: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Router#sho inventory

NAME: "2651XM chassis", DESCR: "2651XM chassis"

, VID: 4.1, SN: FTX0942A2TS

NAME: "High Density Voice2 Network module with on board two port interface ", DESCR: "High Density Voice2 Network module with on board two port interface "

PID: NM-HDV2-2T1/E1    , VID: V03 , SN: FOC12121GCF

NAME: "PVDMII DSP SIMM with Two DSPs", DESCR: "PVDMII DSP SIMM with Two DSPs"

PID: PVDM2-32          , VID: V01 , SN: FOC12121JHH

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions

Help 2651XM, NM-HDV2-2T1/E1 & VIC-2FXO= Amber lights

I am fairly certain that the NM-HDV2-2T1/E1 does not support insertion of the VIC-2FXO in the VWIC slot. A bit dated, but you can check this URL:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a008039c333.shtml

HTH.

Regards,

Bill (@ucguerrilla)

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

1 REPLY

Help 2651XM, NM-HDV2-2T1/E1 & VIC-2FXO= Amber lights

I am fairly certain that the NM-HDV2-2T1/E1 does not support insertion of the VIC-2FXO in the VWIC slot. A bit dated, but you can check this URL:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a008039c333.shtml

HTH.

Regards,

Bill (@ucguerrilla)

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

492
Views
0
Helpful
1
Replies
CreatePlease to create content