Greetings to all! I have tried to get this issue straightened out for a few weeks now but just can't seem to crack the code. I have a uc540 that is connected to my DSL modem/router combo. I have DMZ'ed the uc540 and disabled SIP ALG on my modem/router. I can make outbound calls without and issue and can register on the SIP provider server (Viatalk). Incoming calls are routed directly to voicemail on Viatalk's end. I can see the calls hit the uc540 when I run a debug, but the calls do not get routed into my house. I have attached the configuration of the uc540 and the debug results. Please let me know if anyone can help.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.