This is Faheem Ansari and i need some help to resolve an issue regarding Cisco AS5400 Voice Gateway with Nortel CS1000E. following information will describe you my current scenario,
User A Ext:3010 <------->Nortel CS1000E <----- E1 / PRI ----->AS5400 <----- H323 ----->CUCM 7.1 <--------> User B Ext:4010
i have configured all my hardware required for this scenario, the issue that i am facing is "One Way Voice". "User A" can dial "User B" and "User B" can also dial "User A" but only "User A" can hear "User B". I also want to highlight that there is no firewall involved. so can someone guide me where could be the problem. your support will highly appriciated.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.