Need a suggestion am working on cm6.1 customer has a building with 8 floors when they dial out pstn calls go through gateway at another site out its t1`s
he wants to place a router at the 8 floor building and force 911 and 9911 calls out the fxo port on this router actually each floor placing the call out a particular fxo port if you use H323 i dont think you can force 911 out a particular port on this gateway keep in mind each floor will use 1 port for 911 calls.
if you use mgcp to controll the endpoints i think you can do it but ech floor would have to have new route patterns etc so the na calls fo out the t1 and 911 goes out fxo ports on a different gateway.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...