Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

HelpRqd:For Conference & PBX Integration

1. Conference 3 way. Am send the config of both the routers

2. Key system/ PBX connectivity. The Toplogy is as follows.

AnalogPhones<--->SamsungNX-820-PBX<---->ATA186<--->Switch-RtrA(CME4.0)<--->WAN(512kbps)<--->RtrB<--->FxO<-->PSTN

Pl. Help with the right commands. for 3 way conference local and Internatinal

Regards

Bask

1 REPLY
Silver

Re: HelpRqd:For Conference & PBX Integration

The Cisco DPA 7630 and 7610 Voice Mail Gateways (DPA 7630/7610) enable you to integrate Cisco CallManager systems with Octel voice-mail systems, which might also connect to either Definity or Meridian 1 PBX systems. This integration enables you to use your existing third-party telephony systems along with your Cisco IP telephony system.

For example, you can ensure that features such as message-waiting indicators (MWI) for Octel voice messages are properly set on Cisco IP Phones (connected to Cisco CallManager) and traditional telephony phones (connected to Definity or Meridian 1 PBX systems).

Using the DPA 7630/7610, you can integrate the following systems:

Cisco CallManager 3.1(1) or higher

Octel 200 and 300 voice-messaging systems (using APIC/NPIC integration)

Octel 250 and 350 voice-messaging systems (using FLT-A/FLT-N integration)

Definity G3 PBX systems (DPA 7630 only)

Meridian 1 PBX systems (DPA 7610 only)

This URL should help you:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ec5c0.html

98
Views
1
Helpful
1
Replies