Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

High packet loss while accessing Cisco Unity Connection 8.0

Hi All Networkers,

This is Niran.  I've installed Cisco Unity Connection 8.0 on VMwareworkstation (72 gb & 2gb ram, Bridged). I'm getting high packet loss while pinging the CUC and takes long time to load the web session.

Here is the ping response :

Reply from 192.168.1.11: bytes=32 time<1ms TTL=64

Request timed out.

Request timed out.

Request timed out.

Request timed out.

Request timed out.

Request timed out.

Reply from 192.168.1.11: bytes=32 time<1ms TTL=64

Reply from 192.168.1.11: bytes=32 time<1ms TTL=64

Reply from 192.168.1.11: bytes=32 time<1ms TTL=64

Reply from 192.168.1.11: bytes=32 time=1ms TTL=64

Reply from 192.168.1.11: bytes=32 time<1ms TTL=64

Request timed out.

Request timed out.

Ping statistics for 192.168.1.11:

    Packets: Sent = 899, Received = 659, Lost = 240

Approximate round trip times in milli-seconds:

    Minimum = 0ms, Maximum = 1999ms, Average = 7ms

Please let me know what may be the problem. Thanks in advance.

4 REPLIES
Cisco Employee

High packet loss while accessing Cisco Unity Connection 8.0

Losing pings is expected, it's a security mechanism.

Slow web access usually points to the fact you're not dedicating the whole memory as you should to the VM.

How much memory does the server/PC/etc has where you installed it?

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Hall of Fame Super Silver

High packet loss while accessing Cisco Unity Connection 8.0

Also, check your duplex settings on the NIC to ensue you are running Full Duplex.

HTH,

Chris

New Member

High packet loss while accessing Cisco Unity Connection 8.0

Chris,

I checked my duplex settings, it is Full Duplex

New Member

High packet loss while accessing Cisco Unity Connection 8.0

Hi,

My PC configuration is I7 @ 2.20 ghz, 8gb ram and I allocated 2 GB RAM and 72 GB HD for my VMware.

460
Views
0
Helpful
4
Replies