We have an intermittent issue with our lines at a location , both on a Cisco phone and more infrequently on the IPC System.We had IPC out to test, and today we took 2 hours to test and change ports, change cables, and we were unable to verify that it was the IPC system. This being said,would like to mention that we have been getting errors when trying to dial out, such as dead air and then a fast busy on the Cisco phone, and complete dead air on the Turret. This usually happens at the peak of the trading day when traffic is at peak, and rarely if at all after 6PM. Yesterday however got a message on my Cisco phone display that stated “High Traffic – Call Failed” when the user got the fast busy. This was the first time that it has has occured.
CCM VERSION : 6.1.3
PHONE MODEL : 79XX
Whatever level you reach getting better never stops -- Sachin Tendulkar
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...