Does anyone know if this is supposed to work since the Hold Reversion feature is a global setting on a DN and not specifc to a phone. We have shared lines and when on one of the phones the call is placed on hold, the ring-back goes to that line on that phone only, and not on all the shared lines (on the other phones).
We would like to have all the shared lines to get a ring-back tone indicating someone has been on Hold too long. We are on CUCM 7.0.2 with 7942/62 phones.
The behavior is the same in CUCM 8.6 as it was in the original query.
Here's the 8.6 info;
Table 25-2 Hold Reversion Alerting Operations
Incoming call alerting before hold reversion activates
No hold reversion alerts get sent to the holding phone until the incoming call is answered (except for the hold reversion icon).
Incoming call alerting after hold reversion activates
No additional alerts get sent to the holding phone until the incoming call is answered.
Only the device that initiates the held call receives alerts. Other instances of the shared line do not receive alerts.
Multiple reverted calls on the same phone device or on the same phone line with no incoming call
All reverted calls receive alerts. You can configure different alert intervals for different lines.
Both parties can receive hold reversion alerts.
Holding party represents one-sided call; for example, another feature splits the call or redirects the call
Hold reversion alerts get delayed until the holding party reassociates with another party.
Example: Shared Line
User A and user B exist in the same cluster. User A calls a shared line on user B phone. User B puts the call on hold. If MOH is configured for held calls, user A receives music.
Cisco Unified Communications Manager notifies user B when hold reversion activates for the call—after 30 seconds, Cisco Unified Communications Manager sends the message "Hold Reversion" to the phone and rings the phone once (or beeps or flashes once) on the holding DN. (Your phone may support additional alerting mechanisms.) Other users on the shared line do not receive reverted call alert.
Until user B retrieves the reverted call, Cisco Unified Communications Manager sends periodic reminder alerts every 20 seconds to the holding phone for the DN—Cisco Unified Communications Manager sends the message "Hold Reversion" to the phone and rings the phone once (or beeps or flashes once) on the holding DN at the configured intervals. (Your phone may support additional alerting mechanisms.) No other users on the shared line receive reminder alerts.
User B receives no other calls on the phone. The call has focus, and user B goes off hook. User B retrieves the reverted call.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...