cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
589
Views
6
Helpful
3
Replies

Host not found using softphone

mightyking
Level 6
Level 6

Hollo All,

Some of our admins are using window 2008 server and they don't have access to the directory option when using their softphones. The first 3 options (Missed, Received, Placed Calls) are available but not the "Personal Directory". Please note everything works fine for those using XP version of the windows. We are using the latest CIPC software and the CCM 5.1. Has someone faced this issue? If so, could you please share the solution?

Thanks,

MK

3 Replies 3

Chris Deren
Hall of Fame
Hall of Fame

It sounds like a DNS issue, can you ping CM server by hostname from the machine?

Under enterprise parameters in CM you can chenge the directory URL to IP address of the CM server from the hostname.

Chris

testeven
Cisco Employee
Cisco Employee

Hi!

If you check the "Minimum and Recommended Requirements for Cisco IP Communicator" at:

http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/2_1/english/release/notes/ol113782.html#wp40874

You will see it's not supported on Windows 2008 server, only Vista, XP and 2000. So most likely as it's not documented it has not been tested.

Regards, Tere. If you find this post helpful, please rate! :)

Thanks Guys, I appreciate your replies.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: