Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How can I clear a SHOW EPHONE output ?

I need to know is there a command to delete the show ephone output for the unregistered phones.

R_VOZ_JGS#show ephone

ephone-1 Mac: TCP socket:[-1] activeLine:0 UNREGISTERED

mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0

IP:0.0.0.0 0 Unknown 0  keepalive 0 max_line 0

ephone-2 Mac: TCP socket:[-1] activeLine:0 DECEASED

mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0

IP:10.1.9.54 16223 ATA Phone keepalive 5 max_line 2 dual-line

ephone-3 Mac: TCP socket:[-1] activeLine:0 UNREGISTERED

mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0

IP:10.1.9.54 3970 ATA Phone keepalive 18 max_line 2 dual-line

10 REPLIES
VIP Purple

How can I clear a SHOW EPHONE output ?

Hi ,

can u try clear voice register attempted regsitration or clear telephony-service ephone-attempted-registration command ?

regds,

aman

New Member

How can I clear a SHOW EPHONE output ?

Hi,

I have tried the commands but it only clears the statistics for the attempted-registerations. So unfortunately that didn't work for me.

How can I clear a SHOW EPHONE output ?

Hi Smita,

I think there is no way to remove ephone stats other than removing ephone from the config or you can filter your result by

sh ephone registered and sh ephone unregistered.

Thanks

Manish

New Member

How can I clear a SHOW EPHONE output ?

Hi Manish,

I can do that but currently it will show me as 122 unregistered phones because they were in SRST, but not anymore and I want to clear that.

Smita

How can I clear a SHOW EPHONE output ?

Hi Smita,

If you really need to clear those logs then try reloading the router ,this only option left for you.

rate all the helpful post.

Thanks

Manish

New Member

How can I clear a SHOW EPHONE output ?

Thanks Manish..

I was able to find the solution for it rather than rebooting. I did no telephony-service and then pasted all the commands of the telephony service, so I was able to remove all the ephones.

R_VOZ_JGS(config)#no telephony-service

Skinny Deleted entries for 6 phones

VIP Purple

How can I clear a SHOW EPHONE output ?

Hi Smita,

Thanks for update.

regds,

aman

How can I clear a SHOW EPHONE output ?

Yes "no telephony-service" will remove all config from telephony service. I would not recommend that command in production router just for clearing the logs but glad that it helped you.

Thanks

Manish

New Member

How can I clear a SHOW EPHONE output ?

I agree with you Manish, but since my phones are not going to SRST mode at the moment, so I was good at it . I immediately put back all the 19 commands I had configured and I was good to go

How can I clear a SHOW EPHONE output ?

Hi +5 Smita.

Thanks

Manish

415
Views
5
Helpful
10
Replies
CreatePlease login to create content