How can i configure an FXS port in ccme to use a sip trunk?

[vgioia5090]

I have an FXS card in slot 2 of my 1760 ccme and i would like to configure it to make calls over the sip trunk as well as recieve incoming calls and transfer the calls between the ip phones and the analog phone which will be plugged in it.also is it possible to have that phone mimic a 79XX ip phone as far as most features?

[Nicholas Matthews]

You can register this analog port as a SCCP phone.

There's a whole set of documentation for this:

http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxsbasic.html

http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html