how can i configure extension mobility in CCME

[dbenattou]

hello,

i have CCME 4.2 and i want to configure the extension mobility.

can you post me the configuration that i can put in the router.

thanks in advance.

[paolo bevilacqua]

Link to documentation with examples:

http://cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemobl.html#wpmkr1130585

Hope this helps, please rate post if it does!

[dbenattou]

thanks for reply,

the document is not understandable.

please post me the configuration of EM.

thanks a lot.

[paolo bevilacqua]

Hi,

Which part do you not understand? There is a complete configuration example in there, have you tried ?

[dbenattou]

hello,

i don't understand the type of number (silent, beep, ...)

because this think is not present in Cisco Call Manager.

thanks.

[paolo bevilacqua]

Here the description for button command that is the equivalent of "type" in EM configuration:

http://cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_b1ht.html#wp1067478

Suggest that you begin configuring with "normal" ring. Then depending on the phone type, and user request, you can do more advanced configurations.

As an appreciation to those providing answers, please rate posts using the scrollbox below!

[dbenattou]

hi

will test it tomorrow, and i will post you the result of the test

thanks for your helping.

[dbenattou]

hi,

i have configure the EM within the CCME, but the problem is when i log into the phone, the number place is empty.

the configuation is : voice logout-profile 1

pin 12345

user badr password badr

number 123 type normal

!

voice user-profile 1

pin 12345

user badr password badr

number 4123 type silent-ring

!

!

!

!

!

!

!

!!

!

!

!

!

ephone 1

mac-address 0019.E8C8.5707

type 7961

logout-profile 1

!

!

!

!

!

!

!

!

!!

help me please.