Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How can i know how many phone license i have

Dears

I have CME 2811

which command can verify phone quantities for the installed license

in UC5XX the command "show platform software license"

Thanks in advnace

Regards

3 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Silver

How can i know how many phone license i have

You cannot, CME licenses are Right To Use licenses (paper licenses) that are not applied to anything.  You would need to look at original quotes.

HTH,

Chris

VIP Purple

Re: How can i know how many phone license i have

Hi Zaher,

As explained by Mr. Chris (+5), u need to check the order placed to Cisco since CME/SRST licenses are paper and honour based.

Had it been ISR G2 , you could have run commands to check what all licenses are available in permanent and Eval mode.

regds,

aman

Hall of Fame Super Gold

How can i know how many phone license i have

amanso@hcl.in wrote:

Hi Zaher,

As explained by Mr. Chris (+5), u need to check the order placed to Cisco since CME/SRST licenses are paper and honour based.

Had it been ISR G2 , you could have run commands to check what all licenses are available in permanent and Eval mode.

No. On both ISR G1 and G1 "phone licenses" are exclusively paper, and cannot be "seen" in any manner.

8 REPLIES
Hall of Fame Super Silver

How can i know how many phone license i have

You cannot, CME licenses are Right To Use licenses (paper licenses) that are not applied to anything.  You would need to look at original quotes.

HTH,

Chris

New Member

How can i know how many phone license i have

Hi Chris

kindly look to an actual example

show platform software license


Upgrade license              : uc500-16u-upgrade
License UDI                  : UC520W-8U-4FXO-K9 :FHK11351185
License status               : Not in Use
Maximum User Licenses        : 14
Used User Licenses           : 12
Available User Licenses      : 2
System upgraded atleast once : No

it will gives you the maximum user licenses the same of what i need but for 2811 not for UC5XX

New Member

How can i know how many phone license i have

show platform software license

this command only supported on UC5XX series not on the others

Hall of Fame Super Silver

Re: How can i know how many phone license i have

Question was about CME specifically not UC500.

Chris

Sent from Cisco Technical Support iPhone App

New Member

Re: How can i know how many phone license i have

What I have a cisco 2811

what i need to know

the maximux, used and the remaining users for it

Thank you

VIP Purple

Re: How can i know how many phone license i have

Hi Zaher,

As explained by Mr. Chris (+5), u need to check the order placed to Cisco since CME/SRST licenses are paper and honour based.

Had it been ISR G2 , you could have run commands to check what all licenses are available in permanent and Eval mode.

regds,

aman

Hall of Fame Super Gold

How can i know how many phone license i have

amanso@hcl.in wrote:

Hi Zaher,

As explained by Mr. Chris (+5), u need to check the order placed to Cisco since CME/SRST licenses are paper and honour based.

Had it been ISR G2 , you could have run commands to check what all licenses are available in permanent and Eval mode.

No. On both ISR G1 and G1 "phone licenses" are exclusively paper, and cannot be "seen" in any manner.

VIP Purple

How can i know how many phone license i have

Hi Paolo,

What I was referring to show license all and show license detail commands in ISR G2 which gives output of what all features are activated and are in temporary/permanent mode?

I agree with you , that CME and SRST licenses in ISR G2 are Paper and RTU based.

regds,

aman

282
Views
5
Helpful
8
Replies