Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

how can i reach my voice mail form outside of the office

hi,

I got 2851 ccme and cue.

config is below

in the office i can dial 7000 and i can reach my voicemails but how can i reach from out of the office..

my DID range 3555700-5799

and ephone-dn s are 57xx-5799

dial-peer voice 2001 voip

destination-pattern 5700 >>AA number

session protocol sipv2

session target ipv4:172.30.10.133

dtmf-relay sip-notify

codec g711ulaw

no vad

dial-peer voice 200 voip

destination-pattern 7000>>Voice Mail number

session protocol sipv2

session target ipv4:172.30.10.133

dtmf-relay sip-notify

codec g711ulaw

no vad

dial-peer voice 1 pots

description calls over pri

translation-profile incoming prefix

destination-pattern 9T

direct-inward-dial

port 0/0/0:15

thanks a lot

3 REPLIES
Community Member

Re: how can i reach my voice mail form outside of the office

Hi,

Looks like your voicemail number is out of your DID range.

You got 2 choices, either change 7000 to an extension within your DID range. Or, you can assign a DID number for it, say 5701 and add a translation rule to translate 5701 to 7000.

:)

Eugene

Community Member

Re: how can i reach my voice mail form outside of the office

hi,thanks for your answer

you mean config should be like that?

am i right i should apply the rule in the sip dial-peer an as outogoing?

thanks again.

voice translation-rule 10

rule 1 /5701/ /7000/

!

voice translation-profile to_voicemail

translate called 10

!

dial-peer voice 200 voip

TRANSLATION-PROFILE OUTGOING to_voicemail

destination-pattern 7000

session protocol sipv2

session target ipv4:172.30.10.133

dtmf-relay sip-notify

codec g711ulaw

no vad

Community Member

Re: how can i reach my voice mail form outside of the office

Hi,

Sorry I'm still pretty green in translations, but it looks good to me.

How about this, add another dial-peer like:

dial-peer voice 200 voip

destination-pattern 7000

session protocol sipv2

session target ipv4:172.30.10.133

dtmf-relay sip-notify

codec g711ulaw

no vad

dial-peer voice 201 voip

destination-pattern 5701

session protocol sipv2

session target ipv4:172.30.10.133

dtmf-relay sip-notify

codec g711ulaw

no vad

:)

Eugene

258
Views
5
Helpful
3
Replies
CreatePlease to create content