Re: How can I sort out with phone set have 7914 module installed
From CUCM admin page, you can go to the phone button template (Device --> Device settings --> Phone button button template) and select the one you have created for phones with expansion module (ex: 7960 with expansion module template) and then click on Dependency records in the Related Links, it will show the devices associated with thsi and when you click on phones a list along with MAC addresses (device name) appears.
For this you need to have dependency records service parameter enabled.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...