Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How do I convert a Cisco 186 ATA from a SCCP image to SIP

In the Upgradeing the Cisco ATA Signaling Image documentation it gives me two

options.

Upgrading the Signaling Image from a TFTP Server 

Upgrading the Signaling Image Manually

I have been following the Manual process. I have downloaded different versions of the SIP image. I have run the command ata186us ......zup

I have run the command 100# ip_address......

But keep getting the message "Upgrade Failed"

Can anyone give me any ideas or help???

THanks

1 REPLY
Cisco Employee

Re: How do I convert a Cisco 186 ATA from a SCCP image to SIP

Out of curiosity, have you looked through the admin guide?  Here's the link:

http://www.cisco.com/univercd/cc/td/doc/product/voice/ata/ataadmn/sip30ad/sip88ch3.htm#wp1044846

You might want to try the tftp method to see if you have better luck.

494
Views
0
Helpful
1
Replies
CreatePlease to create content