How do I mask a Local Directory Number on CUCM 6.0.1?

[Samuel Akindele]

I want to mask a Local Directory Number on my CUCM 6.0.1, how do I go about it?

[Brandon Buffin]

Calling out to the PSTN or to another internal phone?

Brandon

[Samuel Akindele]

to internal phones

[Brandon Buffin]

Take a look at the following doc.

https://supportforums.cisco.com/docs/DOC-3029

Hope this helps.

Brandon

[Brandon Buffin · Accepted solution]

Here's some more detail.

Call Display Restrictions

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_2_1/ccmfeat/fshosp.html

Brandon

[Samuel Akindele]

Thanks

i think this will do it.

[William Bell]

If you mean how do you maske the CLID from an IP phone to a PSTN number, then you can do this in the following places:

1. phone line

2. route pattern

3. route list/route group

4. gateway

If you mean how do you mask numbers for internal (phone-to-phone) calls then you can use translation patterns.

Could you provide more specifics on what you are looking to accomplish?

HTH.

Regards,
Bill

Please remember to rate helpful posts.

[Samuel Akindele]

I want to mask to internal (local) phones