Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How do I mask a Local Directory Number on CUCM 6.0.1?

I want to mask a Local Directory Number on my CUCM 6.0.1, how do I go about it?

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: How do I mask a Local Directory Number on CUCM 6.0.1?

Here's some more detail.

Call Display Restrictions

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_2_1/ccmfeat/fshosp.html

Brandon

7 REPLIES
VIP Purple

Re: How do I mask a Local Directory Number on CUCM 6.0.1?

Calling out to the PSTN or to another internal phone?

Brandon

Community Member

Re: How do I mask a Local Directory Number on CUCM 6.0.1?

to internal phones

VIP Purple

Re: How do I mask a Local Directory Number on CUCM 6.0.1?

Take a look at the following doc.

https://supportforums.cisco.com/docs/DOC-3029

Hope this helps.

Brandon

VIP Purple

Re: How do I mask a Local Directory Number on CUCM 6.0.1?

Here's some more detail.

Call Display Restrictions

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_2_1/ccmfeat/fshosp.html

Brandon

Community Member

Re: How do I mask a Local Directory Number on CUCM 6.0.1?

Thanks

i think this will do it.

Re: How do I mask a Local Directory Number on CUCM 6.0.1?

If you mean how do you maske the CLID from an IP phone to a PSTN number, then you can do this in the following places:

1. phone line

2. route pattern

3. route list/route group

4. gateway

If you mean how do you mask numbers for internal (phone-to-phone) calls then you can use translation patterns.

Could you provide more specifics on what you are looking to accomplish?

HTH.


Regards,
Bill

Please remember to rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

Community Member

Re: How do I mask a Local Directory Number on CUCM 6.0.1?

I want to mask to internal (local) phones

447
Views
0
Helpful
7
Replies
CreatePlease to create content