Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How do i monitor SIP Phone from a SCCP Phone? UC500

Hello Community.

This is my SIP Phone config:

voice register dn  2

number 214

name xxx

no-reg

label xxx

voice register pool  2

id mac 44E4.D944.9B11

session-transport tcp

type 9971

number 1 dn 2

number 2 dn 3

dtmf-relay rtp-nte

username xxx password xxx

codec g711ulaw

And this is the SCCP Phone:

ephone  12

device-security-mode none

mac-address 0011.2014.8248

ephone-template 16

username xxx password xxx

type 7960 addon 1 7914

button  1:12 2:51 8m11 9m10

button  10m15 11m13 12m16 13m17

button  14m18

Hope you can help, thanks Patrick

  • IP Telephony
1 ACCEPTED SOLUTION

Accepted Solutions

Re: How do i monitor SIP Phone from a SCCP Phone? UC500

Yes you can.

Sample config :

sip-ua

          presence enable

!

     presence

          presence call-list

          max-subscription 64

          watcher all

          allow subscribe

!

     ephone-dn 12

          number 2010

          allow watch

          blf-speed-dial 1 214 label "Teset-User"

!

     voice register dn 2

          number 214

          allow watch

CME admin guide:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepres.html#wp1011193

Please rate replies and mark question as "answered" if applicable.

Please rate replies and mark question as "answered" if applicable.
2 REPLIES

Re: How do i monitor SIP Phone from a SCCP Phone? UC500

Yes you can.

Sample config :

sip-ua

          presence enable

!

     presence

          presence call-list

          max-subscription 64

          watcher all

          allow subscribe

!

     ephone-dn 12

          number 2010

          allow watch

          blf-speed-dial 1 214 label "Teset-User"

!

     voice register dn 2

          number 214

          allow watch

CME admin guide:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepres.html#wp1011193

Please rate replies and mark question as "answered" if applicable.

Please rate replies and mark question as "answered" if applicable.
New Member

Re: How do i monitor SIP Phone from a SCCP Phone? UC500

Hi and thanks for the answer.

The command "blf-speed-dial 1 214 label "Test-User" is recongnized under the command "ephone-dn" but it works under the command "ephone".

Best regards patrick

203
Views
0
Helpful
2
Replies
This widget could not be displayed.