Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How I can hide internal number? CUCM 6

How I can hide internal number? CUCM 6

Forexample I want to display Unknown message only.

4 REPLIES

Re: How I can hide internal number? CUCM 6

If you require the calling party number or name service to be restricted when dialing another internal called party, then you will need to configure a specific translation rule which is matched in your calling party's CSS when the outgoing call is made.

Refer to the Translation pattern configuration for Calling Line and Name presetation restriction:-

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_0_1/ccmcfg/b03txpat.html#wpxref97194

Hope this helps.

Allan.

New Member

Re: How I can hide internal number? CUCM 6

I am speaking about HIDING number, with somethikng like "Unknown". It's not similar that CSS accesses

VIP Super Bronze

Re: How I can hide internal number? CUCM 6

Hi,

You can achieve this by doing the following:

1. Go to the gateway in question, scroll down to "call routing information-outbound calls"

2. Change the "calling party number presentation to Restricted

3. change the Calling party IE number type unknown to Unknown.

Hope this helps

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
Cisco Employee

Re: How I can hide internal number? CUCM 6

please always look at previous posts

Call Display Restrictions

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_2_1/ccmfeat/fshosp.html

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
2136
Views
0
Helpful
4
Replies
CreatePlease to create content