Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How many operators on one console?

Is it possible to have more than 1 operator per attendant console? So that calls coming in can be picked up by either receptionist on the same number? How do you do this? THANKS!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: How many operators on one console?

In the huntgroup you can setup either phone lines of the attendants or user/line combination. I typically use the user/line combination in the huntgroup. Define two Attendant console users say op1 and op2 and say each have a 7960 with 6 lines each. You can setup the huntgroup members to be op1-L1, op2-L1, op1-L2, op2-L2 ..so on and so forth. Calls coming into the Pilot will go to both operators as long as they are logged in via AC and online.

HTH

Sankar

PS: please remember to rate posts!

1 REPLY

Re: How many operators on one console?

In the huntgroup you can setup either phone lines of the attendants or user/line combination. I typically use the user/line combination in the huntgroup. Define two Attendant console users say op1 and op2 and say each have a 7960 with 6 lines each. You can setup the huntgroup members to be op1-L1, op2-L1, op1-L2, op2-L2 ..so on and so forth. Calls coming into the Pilot will go to both operators as long as they are logged in via AC and online.

HTH

Sankar

PS: please remember to rate posts!

96
Views
0
Helpful
1
Replies