06-19-2012 02:21 AM - edited 03-16-2019 11:44 AM
Dear All,
We are newbie on Cisco IP Telephony solution. Currently we want implement CUCM using 2 MCS7825 and 1 Cisco Router 2911 as voice gateway (with auto attendant feature on Cisco router 2911).
Cisco Router 2911 come with configuration like this
- Cisco2911-V/K9, qty:1
- SL-29-UC-K9, qty:1
- SL-29-IPB-K9, qty:1
- NM-HDV2, qty:1
- VIC2-4FXO, qty:5
- FL-CUE-PORT-2, qty:5
- ISM-SRE-300-K9, qty:1
Cisco Router 2911 come with Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(1)T2.
Note: we still use startup-config that already exist on Cisco Router 2911.
Now we want configure Cisco router 2911 as auto-attendant, but we cannot access Cisco Unity Express (CUE) on Cisco Router 2911.
On show version we see like this
1 Internal Services Module (ISM) with Services Ready Engine (SRE)
Cisco Unity Express 8.6.1 in slot/sub-slot 0/0
We have question about it, Our question:
- What configuration on Cisco Router 2911 that we need to access CUE GUI on Cisco Router 2911?
We attach show version, show running-config, show flash, show inventory (Cisco_2911-capture.txt)
We hope you can give us information about it.
Thanks For Your Attention
06-19-2012 02:26 AM
Hi
Follow below link to configure your ISM module
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel8_5/install/installsre.html
After that follow below link for CUE configuration
Regards
Ronak Patel
Rate helpful posts by clicking stars below the answer.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide