Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to access CUE GUI on Cisco Router 2911

Dear All,

We are newbie on Cisco IP Telephony solution. Currently we want implement CUCM using 2 MCS7825 and 1 Cisco Router 2911 as voice gateway (with auto attendant feature on Cisco router 2911).

Cisco Router 2911 come with configuration like this

- Cisco2911-V/K9, qty:1

- SL-29-UC-K9, qty:1

- SL-29-IPB-K9, qty:1

- NM-HDV2, qty:1

- VIC2-4FXO, qty:5

- FL-CUE-PORT-2, qty:5

- ISM-SRE-300-K9, qty:1

Cisco Router 2911 come with Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(1)T2.

Note: we still use startup-config that already exist on Cisco Router 2911.

Now we want configure Cisco router 2911 as auto-attendant, but we cannot access Cisco Unity Express (CUE) on Cisco Router 2911.

On show version we see like this

1 Internal Services Module (ISM) with Services Ready Engine (SRE)

   Cisco Unity Express 8.6.1 in slot/sub-slot 0/0

We have question about it, Our question:

- What configuration on Cisco Router 2911 that we need to access CUE  GUI on Cisco Router 2911?

We attach show version, show running-config, show flash, show inventory (Cisco_2911-capture.txt)

We hope you can give us information about it.

Thanks For Your Attention

Everyone's tags (6)
1 REPLY
Blue

How to access CUE GUI on Cisco Router 2911

Hi

Follow below link to configure your ISM module

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel8_5/install/installsre.html

After that follow below link for CUE configuration

http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a008037f2a9.shtml

Regards

Ronak Patel

Rate helpful posts by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
6084
Views
4
Helpful
1
Replies
CreatePlease to create content