Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

how to add 8831 phones to cucm 9.0

Hi,

How to add the 8831 Conference phone to CUCM 9.0.1.

I could not find the device type to add  in my CUCM and no Firmware found .

Please tell me the steps for how to add 8831.

Thanks

Nithin Louis.

  • IP Telephony
2 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Purple

how to add 8831 phones to cucm 9.0

Hi Louis,

In addition to what Mr. Manish has said[+5], you can also refer the IP phone feature and CUCM device pack compatibility matrix.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/devpack_comp_mtx.html

regds,

aman

Cisco Employee

Re: how to add 8831 phones to cucm 9.0

Hi Nithin,

If you check the latest readme for 9.0

http://www.cisco.com/web/software/282074299/97296/cmterm-devicepack-9_0_1_11013-1_Readme.pdf

It does not have 8831 as an option.

If you check it for 9.1

http://www.cisco.com/web/software/282074299/104182/cmterm-devicepack-9_1_1_21026-1_Readme.pdf

Its there.

So, please upgrade to 9.1 and it will work.

Thanks Aman [+5] for your thoughts as well.

HTH

Manish

17 REPLIES
New Member

how to add 8831 phones to cucm 9.0

Hi,

probably try by uploading device pack for 8831 SIP phone in call manager else upgrade call manger 9.1version.

Thanks.

Cisco Employee

how to add 8831 phones to cucm 9.0

New Member

how to add 8831 phones to cucm 9.0

Hi Manish,

Thanks for your reply.

I am having 9.0.1 cucm version can i install the device package 9.1 for my cucm.As I can see the software Compatibility for the device package 9.1 is cucm version 9.1.or do i need to upgrade to 9.0.1 to 9.1?

Best Regards

Nithin Louis.

Cisco Employee

how to add 8831 phones to cucm 9.0

An upgrade to 9.1 is recommended as i believe that there are no software updates being planned for 9.0 version now.

Manish

New Member

Re: how to add 8831 phones to cucm 9.0

Hi Manish,

       

Thank you very much for your quick reply.

As I can see in the data sheet for 8831 its supporting the version from 7.1(5), 8.5(1), 8.6(2),9.0, and later.Please find the attached 8831 phone data sheet. Please check Table 1 in page 2 for supported CUMC.

Is it possible without any upgrade to 9.1 ?

Best Regards

Nithin Louis.

New Member

Re: how to add 8831 phones to cucm 9.0

Sorry for not attaching the data sheet.Please review the attached file.

Please check Table 1 in page 2 for supported CUMC.

VIP Purple

how to add 8831 phones to cucm 9.0

Hi Louis,

In addition to what Mr. Manish has said[+5], you can also refer the IP phone feature and CUCM device pack compatibility matrix.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/devpack_comp_mtx.html

regds,

aman

VIP Purple

how to add 8831 phones to cucm 9.0

Hi Louis,

HAd u been using CUICM 7.1(5)/9.1(1)  then, no Device pack is required?

U can check in the link provided by me.

regds,

aman

Cisco Employee

Re: how to add 8831 phones to cucm 9.0

Hi Nithin,

If you check the latest readme for 9.0

http://www.cisco.com/web/software/282074299/97296/cmterm-devicepack-9_0_1_11013-1_Readme.pdf

It does not have 8831 as an option.

If you check it for 9.1

http://www.cisco.com/web/software/282074299/104182/cmterm-devicepack-9_1_1_21026-1_Readme.pdf

Its there.

So, please upgrade to 9.1 and it will work.

Thanks Aman [+5] for your thoughts as well.

HTH

Manish

13686
Views
15
Helpful
17
Replies