Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to assign DN to analog port on VIC-4FXS in 2801 Router with CME 4.0(2)

Please help me

I know how to manually assign directory number to analog phone on analog port on VG248 FXS by calculating MAC address with CME4.0(2). But when need to do with router 2801 with VIC-4FXS/DID card I do not know how

I try with

ephone-dn 13

number 213

label 213

description Analog 213

ephone 13

device-security-mode none

username "user13" password 213

button 1:13

I get next message “Need to configure ephone mac address or VM station-id”

I have segment in my router configuration

voice-port 0/0/0


voice-port 0/0/1


voice-port 0/0/2


voice-port 0/0/3

for FXS ports

Can you Help me please

10x in advanced

Hall of Fame Super Gold

Re: How to assign DN to analog port on VIC-4FXS in 2801 Router w

If you need the analog phone to have the full features, see:


If you don't, just configure

dial-peer voice 213 pots

destination-pattern 213

port 0/0/3

Hope this helps, please rate post if it does!