Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to block call termination with CUCM

Dear networkers,

We have Cisco Unified Communications Manager 4.1 installed. CCM users are making outbound calls throught the PSTN to customers, We woulmd likr that only PSTN users can terminate the calls.

Is this possible with CallManager?

Thanks in advance.

Regards.

4 REPLIES
Cisco Employee

Re: How to block call termination with CUCM

not with CCM, CME or any other call control from Cisco. either user can end the calls

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: How to block call termination with CUCM

Hi javalenc,

Thanks for your response.

with CallManager We can personalize the Phon button template: we can for exemple remove the button "End call" in the "connected" status of the call. By this way the ccm users cannot see the soft button "end call" but the problem that ccm endusers can hang up the phone physically and then the call is terminated!

Can we deactivate such thing ?

Best Reagds.

Thanks in advance.

Cisco Employee

Re: How to block call termination with CUCM

no, you can't. that's why i already mentioned it's not possible

BTW: use terms properly, phone button template is how many lines, SDs, BLFs you have on a phone. softkey template is the one you can change options based on phone state

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Bronze

Re: How to block call termination with CUCM

Think about that. They put the handset on the phone. Then what? The PSTN caller is still on the line? This isn't possible. Not sure why it is needed either.

140
Views
0
Helpful
4
Replies